Scala Rider Q3 Review: A Versatile Bluetooth System for Motorcycle Riders
If you are looking for a Bluetooth communication and entertainment system for your motorcycle helmet, you might want to consider the scala rider q3. This device allows you to enjoy intercom conversations with up to four other riders, listen to music, radio, GPS instructions, and phone calls, and customize your settings via the Cardo Community platform. In this article, we will review the main features, compatibility, installation, performance, and troubleshooting of the scala rider q3.
Compatibility
The scala rider q3 can pair with up to two Bluetooth devices simultaneously, such as a mobile phone, a GPS device, or an MP3 player. You can also pair it with up to four other scala rider q3 units for intercom communication within a range of up to 1 km / 3,200 ft (subject to terrain). The scala rider q3 is compatible with most scala rider models for intercom calls, such as G9, G4, Q1, Q2 PRO, and SCHUBERTH SRC-System. You can also use the Click-to-Link feature to spontaneously connect with random scala rider users nearby who have CTL capability enabled. To pair your devices with the scala rider q3, you need to enter the Bluetooth pairing mode by pressing the Volume Up or Volume Down button for 5 seconds. Then, follow the instructions on your device's screen or manual to complete the pairing process.
scala rider q3 software download
Installation
The scala rider q3 comes with an audio kit that includes a noise-canceling microphone, interchangeable hybrid microphone (corded mic also provided), speakers, speaker booster pads, Velcro pads, glue plates, hybrid mic clip, and an Allen wrench. You can attach the audio kit to your helmet using either the standard back plate or the glue plate method. The standard back plate method involves loosening both screws on the back plate, pushing it between the helmet's outer shell and inner padding, and tightening the screws. The glue plate method involves removing the back plate by taking out both screws, using an alcohol pad to clean the exact spot on the helmet where you want to glue the audio kit, peeling off the protective backing sheet from the glue plate, pressing it firmly on the helmet for 15 seconds, allowing it to dry for 24 hours, and fastening both screws tightly. Once you have attached the audio kit to your helmet, you need to position the microphone and speakers according to your preference. For open face or modular helmets, you can use the adjustable boom mic and attach it to a Velcro pad inside the helmet lining. For full face helmets, you can use the corded mic and attach it to a Velcro pad inside the front of the helmet. You can also change the microphone type by removing and reattaching the audio kit and back plate. For best clarity, place speakers directly opposite and close to your ears. You can use speaker booster pads if your helmet has deep recesses. After positioning the microphone and speakers, you can slide and click the scala rider q3 control unit onto the audio kit.
Performance
The scala rider q3 offers several functions that enhance your riding experience. Here are some of them:
Intercom
The intercom function allows you to communicate with up to four other riders who have a compatible scala rider device. You can toggle between different intercom channels by tapping or double tapping the Intercom Button. You can also use voice commands or VOX technology to activate or deactivate intercom calls by speaking any word loudly. The intercom quality is clear and crisp thanks to PLC (Packet Loss Concealment) software that compensates for audio losses in challenging environments. The intercom range is up to 1 Software Update
One of the advantages of the scala rider q3 is that you can update its software online via your Mac or PC. This way, you can enjoy the latest features and enhancements that Cardo Systems offers for your device. To update your software, you need to download and install the Cardo Update tool from the Cardo website. Then, connect your scala rider q3 to your computer using the USB cable and follow the instructions on the screen. You can also use the Cardo Community platform to customize your settings, such as AGC, VOX, radio presets, and more. You can access the Cardo Community by registering your device on the Cardo website and creating a personal profile.
Troubleshooting
Although the scala rider q3 is designed to provide you with a reliable and enjoyable performance, you may encounter some issues or difficulties while using it. Here are some common problems and their possible solutions:
Problem: The scala rider q3 does not turn on.
Solution: Check if the battery is fully charged. If not, connect the device to a power source using the wall charger or USB cable and wait until the LED turns green. If the battery is charged but the device still does not turn on, try resetting it by inserting a paper clip into the reset hole on the back of the device for a few seconds.
Problem: The scala rider q3 does not pair with other devices.
Solution: Make sure that both devices are turned on and within range. Make sure that both devices are in Bluetooth pairing mode. For the scala rider q3, press and hold the Volume Up or Volume Down button for 5 seconds until the LED flashes red and blue alternately. For other devices, refer to their manuals for pairing instructions. Make sure that both devices are compatible with each other. The scala rider q3 can pair with up to two Bluetooth devices simultaneously, such as a mobile phone, a GPS device, or an MP3 player. It can also pair with up to four other scala rider q3 units or compatible scala rider models for intercom communication. If you have already paired more than two Bluetooth devices or more than four intercom devices with your scala rider q3, you may need to delete some of them from your device's memory. To do this, press and hold both Volume buttons for 6 seconds until you hear "Delete all pairings" and confirm by tapping any button.
Problem: The sound quality of the scala rider q3 is poor.
Solution: Check if the volume level is appropriate for your environment. You can adjust the volume by pressing the Volume Up or Volume Down button. You can also enable or disable AGC (Automatic Gain Control) technology, which automatically adjusts the volume according to ambient noise and driving speed. To do this, press and hold both Volume buttons for 2 seconds until you hear "AGC on" or "AGC off". You can also customize the AGC sensitivity levels via the Cardo Community platform. Check if the microphone and speakers are positioned correctly inside your helmet. For best clarity, place speakers directly opposite and close to your ears. You can use speaker booster pads if your helmet has deep recesses. For open face or modular helmets, use the adjustable boom mic and attach it to a Velcro pad inside the helmet lining. For full face helmets, use the corded mic and attach it to a Velcro pad inside the front of the helmet. You can also change the microphone type by removing and reattaching the audio kit and back plate. Check if there is any interference or obstruction between your device and other paired devices. Avoid placing any metal objects between them or near them. If possible, move closer to them or change your position relative to them.
scala rider q3 firmware update
scala rider q3 user manual
scala rider q3 pairing instructions
scala rider q3 bluetooth communication system
scala rider q3 multiset pro
scala rider q3 replacement parts
scala rider q3 battery life
scala rider q3 vs packtalk
scala rider q3 installation guide
scala rider q3 troubleshooting
scala rider q3 app for android
scala rider q3 accessories and spare parts
scala rider q3 music sharing
scala rider q3 intercom compatibility
scala rider q3 best price
scala rider q3 review and ratings
scala rider q3 how to use
scala rider q3 reset procedure
scala rider q3 warranty and service
scala rider q3 earbud adapter
scala rider q3 voice commands
scala rider q3 cardo community
scala rider q3 helmet compatibility
scala rider q3 volume control
scala rider q3 gps pairing
scala rider q3 speaker booster pads
scala rider q3 hybrid microphone clip
scala rider q3 corded microphone sponge
scala rider q3 wall charger plug
scala rider q3 usb cable replacement
scala rider q3 mp3 cable connection
scala rider q3 allen wrench size 2.5
scala rider q3 large hybrid boom microphone sponge
scala rider q3 head unit only
scala rider q3 small hybrid boom microphone sponge
scala rider q3 speaker repositioning ear pads
scala rider q3 square velcro pair for speaker/mic
scala rider q3 wired microphone sponge replacement part
scala rider q3 motorcycle accessories pdf manual download
scala rider q3 bluetooth communication and entertainment system Conclusion
The scala rider q3 is a versatile Bluetooth system for motorcycle riders who want to stay connected and entertained on the road. It offers intercom communication with up to four other riders, audio streaming from various devices, voice control, and software update. It is compatible with most scala rider models and other Bluetooth devices. It is easy to install and customize via the audio kit and the Cardo Community platform. It has a clear and crisp sound quality thanks to PLC software and AGC technology. It also has a long battery life and a durable design. However, it also has some drawbacks, such as limited intercom range, potential pairing issues, and occasional sound distortion. Overall, the scala rider q3 is a good choice for riders who value convenience, functionality, and quality.
FAQs
Q: How long does the battery of the scala rider q3 last?
A: The battery of the scala rider q3 can last up to 8 hours of talk time or 1 week of standby time. You can check the battery status by tapping the Intercom Button once. You will hear a voice prompt indicating the battery level (high, medium, or low). You can also see the battery level on your mobile phone screen if it supports this feature. To charge the battery, connect the device to a power source using the wall charger or USB cable. The LED will turn red while charging and green when fully charged. It takes about 4 hours to fully charge the battery.
Q: How do I update the firmware of the scala rider q3?
A: To update the firmware of the scala rider q3, you need to download and install the Cardo Update tool from the Cardo website. Then, connect your device to your computer using the USB cable and follow the instructions on the screen. You can also use the Cardo Community platform to customize your settings, such as AGC, VOX, radio presets, and more. You can access the Cardo Community by registering your device on the Cardo website and creating a personal profile.
Q: How do I reset the scala rider q3?
A: To reset the scala rider q3, you need to insert a paper clip into the reset hole on the back of the device for a few seconds. This will reboot the device and restore its default settings. You will need to pair your devices again after resetting.
Q: How do I change the language of the scala rider q3?
A: To change the language of the scala rider q3, you need to press and hold both Volume buttons for 8 seconds until you hear "Select language" and then tap any button. You will hear a voice prompt indicating the current language. To change it, tap any button until you hear your desired language and then press any button for 2 seconds to confirm. The available languages are English, French, German, Italian, Spanish, Portuguese, Russian, Japanese, Chinese, Korean.
Q: How do I contact Cardo Systems for support or feedback?
A: To contact Cardo Systems for support or feedback, you can visit their website at www.cardosystems.com and fill out an online form or call their toll-free number at 1-800-488-0363 (US & Canada) or +1-412-788-4533 (International). You can also follow them on Facebook, Twitter, YouTube, Instagram, or LinkedIn for updates and news. 44f88ac181
Comments